Get double-sided adhesive foam pads cut to the dimensions your project requires. Sticky Pad Shop uses a 1/4-inch solid black foam core with 3M 468MP adhesive on both sides, creating a clean way to mount, space, cushion, and isolate components.
Custom sizes for real-world applications
Standard pads are useful for common jobs, but many assemblies need a specific footprint. Custom cutting helps match the adhesive foam to the component instead of forcing the component to fit an off-the-shelf pad.
- PCB and electronics mounting
- Signs, labels, and nameplates
- Automotive trim and accessory projects
- Craft, maker, and DIY assemblies
- Picture, display, and decorative mounting
- Vibration reduction and clearance between components
Material construction
- Core: 1/4-inch solid black foam
- Adhesive: 3M 468MP double-sided adhesive
- Format: Pre-cut pads sized for the requested application
- Available range: From 1/2 inch up to 24 inches square
The foam core adds separation between surfaces and can help reduce vibration. The adhesive layers create a low-profile bond without visible screws or brackets.
What to include with a custom-size request
For the fastest review, provide the finished width and length, quantity, and a short description of the surfaces and application. If the pad needs a special shape, opening, or edge detail, include a clear drawing with measurements.
- Finished width and length
- Quantity needed
- Surface materials
- Indoor or outdoor use
- Any unusual heat, moisture, vibration, or load conditions
Surface preparation and installation
Adhesive performance depends on the surface and installation. Before applying a pad, clean and dry both surfaces and remove dust, oil, wax, and loose material. Confirm the position before exposing the adhesive, then apply firm, even pressure across the pad.
Test the pad on a small, inconspicuous area when working with delicate finishes, textured surfaces, flexible materials, or an unfamiliar coating. The user is responsible for confirming that the product is suitable for the intended surface, load, and environment.
Custom cut or standard size?
Choose a standard size when a common square or rectangle fits the job and quick ordering is the priority. Choose custom cutting when the pad must match a component footprint, maintain a defined edge clearance, or cover a larger area without combining multiple pieces.
Request a custom-cut quote
Include the finished width, length, quantity, surface materials, and application notes. For a special shape or opening, attach a dimensioned drawing when you email us.
Prefer a standard pack? Shop ready-to-order sizes. For general questions, visit the contact page.
We review each request for manufacturability and application fit before quoting. A quote is not an engineering certification; test the product for your surface, load, and environment.